Sean Cudnoski is a civil engineer and highway engineering expert with more than 25 years of design and construction phase services experience for state, county, and municipal roadways, and general site/civil engineering projects for public and private clients. He applies his expertise to forensic casework involving injuries and financial claims related to the performance and construction of transportation and other infrastructure systems.
Prior to joining Robson Forensic, Sean worked in consulting engineering as a hands-on Project Manager and managed multi-faceted project teams and schedules on multimillion dollar roadway projects for the Texas Department of Transportation (TxDOT), counties, and municipalities in Texas. This includes managing the design, preparing the plans, specifications, estimates, and schedules for over 50 miles of highways, arterials, collectors, and local roadways, from reconstruction/rehabilitation to added capacity projects and roadways on new location. These projects included design of horizontal and vertical geometry, open channel and culvert/bridge hydraulics, clear zone analysis, guardrails, regulatory signs, intersections, crosswalks, driveways, bike lanes, sidewalks and ADA ramps. Through these efforts, Sean is well versed in preparing work zone temporary traffic control plans and project phasing in accordance with the MUTCD and TxDOT regulations.
In addition to his roadway design experience, Sean has a diverse background in general civil design and project management. He has been the engineer of record on site civil improvements on multimillion dollar expansion projects for Texas Tech University as well as new residential and commercial developments. These projects included site grading and drainage, setting the finish floor elevations, ADA compliant design of parking lots, sidewalks, and ramps, municipal water distribution, sanitary sewer collection, and franchise utility conflict identification and relocation coordination.
Sean earned his B.S. in Civil Engineering from Texas Tech University. He is a licensed Professional Engineer in Texas and a member of the American Society of Civil Engineers (ASCE) and the Texas Society of Professional Engineers (TSPE).
Experienced with over 25 years in design, construction phase services, and subsurface utility investigation for roadways and other general civil engineering design projects. Managed the design of over 50 miles of roadways in Texas. Experience includes roadway horizontal and vertical design, cross section analysis to optimize cut/fill quantities and avoid/minimize ROW impacts, open channel and bridge/culvert hydraulics and design, storm sewer design, municipal water distribution, sanitary sewer, pedestrian/bike facilities, residential and commercial development, parking lots, ADA facilities, Subsurface Utility Engineering, franchise utility coordination/conflict resolution, detailed construction traffic control plans/phasing, design and construction critical path scheduling.
Associate
2026 to presentProvide technical investigations, analysis, reports, and testimony toward the resolution of commercial and personal injury litigation involving civil engineering, roadway, highway and sidewalk design, pedestrians, bicycles, and scooters struck by vehicles in public rights of way, grading, guardrail design, traffic control devices, pavement markings, warning signs, temporary traffic control in work zones, bicycle lane design, and stop controlled intersection design.
Branch Manager
2023 to 2026Managed Assistant Project Managers, CAD staff and other office and field staff in the development of Subsurface Utility Engineering (SUE) investigation projects in Texas (Quality Level D through Quality Level A) from initial proposal request to final signed and sealed deliverables. SUE investigations ranged from one or two Quality Level A (test holes) projects to 10-mile-long SUE Quality Level D, C, B, and A projects involving multiple months in the field marking and surveying utilities and performing test holes and multiple months in the office processing the data. Developed existing utility sheets and test hole data forms to show the existing locations of underground utilities within the scope of the projects.
Project Manager/Practice Builder
2015 to 2022Multidiscipline nationwide engineering consulting firm. Provided professional services for public and private sector clients. Provided design and project management on wide variety of civil engineering projects but mainly focused on roadway/highway improvement projects for TxDOT and local municipalities.
Work included: parking lot design including accounting for minimum number of accessible spaces required, maintaining minimum ADA slopes, roadway right-of-way determination through design of roadway horizonal alignment and vertical profile optimization, cross section and roadside design. Design of concrete and asphalt paved roadways, treated subgrade, concrete curb and gutter, sidewalks, pedestrian/bike facilities, intersections, determining locations and length of need for guardrail, storm drainage (open channels, culverts and bridges), signing and pavement markings, temporary traffic control phasing/staging, utility conflict identification/resolution, utility relocation coordination, design and construction critical path scheduling and construction phase services.
Senior Engineer/Project Manager
2008 to 2015Civil engineering and land surveying firm. Provided project management, civil engineering design, construction phase services to private and public clients such as commercial and residential developers, TxDOT, City of Lubbock and Texas Tech University. Projects ranged from residential and commercial developments to large scale sewer pipeline design and roadway improvement projects.
Work included: Determined finished floor elevations for new buildings and private residential lots, designed new commercial sites including site grading, domestic water and sewer, parking lots including accounting for minimum number of accessible spaces, maintaining minimum ADA slopes, crosswalks, sidewalks, roadway right-of-way width determination through design of roadway horizontal alignment and vertical profile optimization, cross section and roadside design. Designed concrete and asphalt paved parking lots and streets, concrete curb and gutter, sidewalks, pedestrian/bike facilities, intersections, storm drainage (open channels and culverts), signing and pavement markings, traffic control phasing, utility conflict identification/resolution, coordinating utility relocations design and critical path scheduling and construction phase services.
Special Projects Manager
2008Geotechnical engineering and construction materials testing firm provided testing/reporting for design and construction materials testing services for a variety of private sector clients.
Work included: Managed area office and staff technicians stationed at multiple wind farm construction field offices throughout west Texas. Made regular site visits, observed/performed quality control inspections and materials testing and certified lab reports that the testing was completed following ASTM and ACI standards.
EIT/Engineer/Project Manager
1999 to 2008Multidiscipline regional engineering and architectural consulting firm providing services for public and private sector clients. Provided design and project management on wide variety of civil engineering projects but mainly focused on roadway/highway improvement projects for TxDOT and local municipalities.
Work included: roadway right-of-way determination through design of roadway horizontal alignment and vertical profile optimization, cross section and roadside design. Design of concrete and asphalt pavement, concrete curb and gutter, sidewalks, pedestrian/bike facilities, intersections, determining locations and length of need for guardrail, storm drainage (open channels, culverts and bridges), signing and pavement markings, traffic control phasing, utility conflict identification/resolution, utility relocation coordination, design critical path scheduling and construction phase services.
Engineering Technician
1997 to 1999Worked part time while completing my college engineering courses. Gained early exposure to the engineering design process and preparation of construction plans, specifications and bid documents. Learned computer aided drafting (CAD) of engineering details and processing topographic survey data, performed engineering calculations, performed site visits.
Registered Professional Engineer: Texas
B.S., Civil Engineering, Texas Tech University, Lubbock, Texas
American Society of Civil Engineers (ASCE), Member
Texas Society of Professional Engineers (TSPE), Member
v. 11/9/26